UPVC Door Repairs Near Me
Your door is your home's first line of defense against burglaries therefore it must be in good working order. This isn't a job for the amateur DIYer so should you find that your uPVC front door has significant damage, it's best to engage an expert trader to repair it.
Windowgeeks has more than 28 years experience in the repair of uPVC windows and doors in Gloucestershire.
Cracked uPVC
uPVC doors are prone to cracks and damage on their surfaces. This could be due to a variety of reasons, including environmental elements or the wear and tear of the door. Fortunately, this type of damage is easily fixed. A uPVC specialist can to restore the appearance of your door. This procedure can be time-consuming and costly, but it is essential to ensure the security of your home.
Based on the type of crack your uPVC door has, you may have to replace the whole frame or the entire panel. It is best to employ a professional for this job, as they have the tools and experience necessary to maintain your uPVC doors. They can also ensure that the hinges and door are safe.
Another common uPVC door issue is misalignment. This is caused by the aging of the hinges and other external factors. The best way to determine if your uPVC doors are properly aligned is by using a level. If the distance between the frame and the door is different at the top and middle, it is likely that hinges are not aligned.
uPVC door surfaces can also be damaged, such as scratches and dents. This is usually fixed by cleaning the surface with a nonabrasive cleaning product, and then removing any dirt. In some instances it is possible to resand the surface and apply filler material. Be careful not to expose your uPVC material to direct sunlight since it will deteriorate over time.
It is essential to fix cracks in uPVC when you spot it as quickly as you can. This will shield your home from further damage and ensure it is safe for use. It is also essential to wash your uPVC doors on a regular basis. This will stop the accumulation of dirt, which could cause a myriad of issues. Cleaning your doors should be done using a non-abrasive and gentle cleaning solution. It is also an excellent idea to limit the exposure of your doors made from uPVC to direct sunlight.
Hinges that are not aligned
The problem of misaligned hinges is one that affects the function and aesthetic of your doors. They can cause friction between the frame and the door, resulting in creaking and squeaking. It is also possible for hinges to break because of normal wear and tear, rust, or if they are constantly closed. In this case it is essential to repair the issue as soon as possible.
In most cases, the door hinges can be adjusted by changing the screw on the hinge. However, if the knuckles on the hinge are broken or bent, you will need to fix them by welding or replacing them entirely. If the hinges for your door aren't secure they may require you to use longer screws than the ones currently in use.
The first step in determining the root of your misaligned hinges is to take a step back and visually inspect them. Check for gaps between the edges of the door and the hinges themselves. If the gap is larger on one side, than the other, it is a sign that the frame is not in alignment and the door will have to be shimming.
It's also possible that the hinges are not sufficient tight, which can cause the door to bind when opening and closing. This can be resolved by tightening the hinge screws using a screwdriver or drill. If the hinges have stripped threads and are loose and sagging, you can replace them with screws that are larger.
As a house settles and shifts over time the door's strike plate can expand and get out of alignment with its jamb. To correct this, you can try sanding the area that is rubbing against the jamb or you can move the strike plate to a different position on the jamb.
The most common issue with a door that is not aligned is because the hinges are loose. This can be caused by loose hinge screws, stripped or corroded anchor plates or a failure to ensure proper installation when the door was initially installed. You can fix the problem by tightening the screws and ensuring whether the anchor plates have been installed correctly. If the door isn't in alignment, you can try to reposition the hinges. To do this, drill new holes and plug the holes that were previously drilled.
Broken glass
Glass in homes can break due to accidents, natural disasters, or even vandalism. Glass pieces can be extremely sharp, which makes handling them a challenge. Wear gloves, thick shoes and long sleeves or pants when cleaning broken glass. These safety precautions can help you and others avoid injuries. It is essential to dispose of broken glass safely. Place it in the garbage instead, as it increases the risk of injury or harm to the environment. Instead, put the glass in a clean box and scan the ground using flashlight to find any smaller pieces. After you have gathered all the pieces, seal it shut and label it to let anyone who stumbles upon it know to not open it.
Functional UPVC sliding door seals prevent moisture, water and heat from escaping the home. They are susceptible to damage if the frame, but can be repaired by taking out the staples that cover the seal with a screwdriver or putty blade. After removing any glue or staples left on the seal, you can seal it again.
Injuries resulting from broken glass might not be the focus of attention however, they do happen often. The types of injuries vary from scratches and cuts to puncture wounds and severed arterial. Cleaning up broken glass requires great care and can be very hazardous. This is especially true when the broken glass is made of laminated or tempered glass. Luckily these injuries are easy to treat and could be prevented by a time and careful preparation.
In the event that your uPVC patio door does break, it's best to contact a professional to fix or replace it. They will quickly assess the damage to provide you with an accurate estimate. Generally speaking, these kinds of repairs can be done in about an hour. In certain instances, however, you may have to replace the entire door if it is beyond repair. The cost of replacing a uPVC patio can differ based on its size and type.
The locks are not working properly
A door lock that doesn't work as it should can be a security risk. It could be that the latch or bolt isn't striking the strike plate properly, which would mean your home is vulnerable to burglars who are able to push the door open. Or, it could be that the cylinder is defective. If lock repair near me is the case, you can tell by how far the deadbolt extends through the door hole. If the deadbolt doesn't extend completely or makes a loud, high-pitched sound when it is turned, it is likely that the cylinder has been damaged.
In some cases it is possible to fix a lock that's faulty by lubricating it with the correct oil. This can help keep the lock from becoming stuck or frozen. If you've tried this method but the problem persists it's better to contact a professional.
A door lock can become stiff due to dirt and grime. You can clean this off using a cotton swab or a toothbrush that is placed in the keyhole, although you might need to take the lock apart to get at specific parts. After cleaning the lock, you can re-establish its function by applying a generous amount of the lubricant. Make use of a dry lubricant such as graphite spray instead of wet lubricants like WD-40. These are more likely to cause damage to the internal components of the locks.
While it's possible to fix a lot of these issues on your own, the more serious ones are best left to experts who specialise in uPVC and aluminium repairs near me. A professional can bring back your uPVC windows and doors in good working order, ensuring that your home is safe and secure. Make sure to check your warranty or insurance policy for coverage of damaged or defective windows and doors. If you need to pay for repairs, they will be less expensive. The longer you wait to fix a broken window or door, then the more money you will spend.